Daily maintenance of metal crusher

1. The metal crusher shall be fixed on the cement base course. If you often work in different places, the motor should be installed in the rolling mill with angle steel frame.

2. Before starting the machine, check the fastening bolts of all parts, whether the transmission belt is tight and whether the power cord is in good condition.

3. Check whether the hammer is intact and whether the spindle rotates flexibly without jamming, collision and friction.

4. After the machine is started, empty the equipment for 2 - 3 minutes to check whether the rotor is correct and whether the sound is normal.

5. At any time, pay attention to the operation of the crusher, feed evenly at any time to prevent blockage, and do not overload for a long time.

6. Carefully check the crushed materials, and do not mix stones, stones and other foreign matters, so as not to damage the machine.

7. When the machine is running, the operator shall not leave the machine or place tools on the machine or packaging.

8. In case of blockage, for example, the operator does not wear gloves. Do not put your hands into the packaging funnel. When feeding, stand on the side of the grinder to prevent rebound and debris from damaging the face.

9. Do not stop immediately after the work is completed. Turn it for 2 - 3 minutes, discharge it completely, and clean and maintain it after shutdown.

10. Hammer blade is the main vulnerable part. After wear, the hammer needs to be replaced. When replacing a new hammer head, the hammer piece must be replaced at the same time, and cannot be replaced by a hammer alone.

11. After 300 hours of crusher, the bearing should be cleaned and the oil should be changed. After stopping for a long time, the belt should be removed.