Oil press 100XING

The oil press has the advantages of scientific design, reasonable structure, simple operation, safety and stability, and adopts full-automatic device. It takes only a few minutes from feeding to finished products at one time.

The oil press is made of high carbon steel, which is hardened by high frequency and heat-resistant treatment. It has high hardness, high strength and good wear resistance. It is suitable for continuous operation under high temperature and high pressure, which improves the service life of the oil press and can be used for decades.

The oil press adopts the principle of multistage propulsion and progressive pressurization to rapidly increase the pressure in the press chamber and make the oil split and separate at one time. Then, the infrared temperature control system is adopted to automatically control the pressing temperature and moisture, so as to directly soften the oil and activate the oil molecules. The pressing is stable and squeezed out at one time, which greatly improves the oil yield.

As the saying goes, three parts are pressed and seven parts are fried. The quality of fried materials directly affects the quality and oil yield of oil products, and the key of fried materials lies in the quality and device of frying machine. The oil press adopts gear transmission. All models are equipped with vibration damping and noise reduction devices, thickened steel plate and frying chamber volume. It can be heated with a variety of heating fuels (coal, electricity, gas, firewood, etc.), widely heated and fried quickly, which greatly improves the service life of the frying machine and the quality of fried seeds. It is also equipped with advanced devices such as oil temperature display instrument and reversing switch function, which is easy to operate, High degree of automation.

5、 The oil press is suitable for all seasons without restrictions

The oil press is not restricted by the climate and is suitable for all seasons. Because the oil pan device adopts the heating control system, the crude oil temperature can be automatically adjusted according to the ambient temperature to achieve the effect of rapid fine filtration. Therefore, it can be pressed and operated all year round without the influence of season and climate.

The oil press increases the oil filtering pressure and the temperature of crude oil. The new oil guide technology, sudden filtration, pure oil, and simultaneous oil filtering and pressing greatly improve the oil filtering speed, which is convenient and practical. It is an ideal choice for the majority of users.

During the working process of the oil press, the power is switched on first, the motor drives the pressing screw to rotate at a high speed, and the processed oil enters the pressing chamber from the press hopper. Under the condition of high pressure, there will be a great friction resistance between the material embryo and the pressing screw, the material embryo and the pressing bore. The heat generated by the friction helps to promote the thermal denaturation of the protein in the material embryo, destroy the colloid and increase the plasticity. On the other hand, the diameter of the pressing screw is gradually increased, and the pitch is gradually reduced, so the material embryo can not only advance forward, but also turn outward, and the material layer near the surface of the pressing screw thread also rotates with the pressing shaft. In this way, each material embryo particle in the pressing chamber is not equal speed, in the same direction, which helps the oil to be fully pressed, reduce the residual oil in the cake, so that the oil in the oil is more fully pressed out.