Solution to blockage of metal crusher

During the use of the metal crusher, some users do not know much about the metal crusher, and the metal crusher is easy to be blocked due to improper operation. In order to make all metal crusher users can easily operate the metal crusher, Xiaobian will introduce how to solve the problem of metal crusher blockage.

1. The unreasonable design of the discharge port will cause poor discharge or too fast feeding, which will block the air outlet of the crusher; Improper matching with the conveying equipment will cause the discharge pipe to be blocked after the wind is weakened or there is no wind. After finding out the fault, first clear the delivery port, change the mismatched conveying equipment, and adjust the feeding volume to make the equipment operate normally.

2. Hammer fragments, aging, closed and broken screen holes, and high moisture content of crushed materials will block the crusher. The broken and seriously aged hammer pieces should be regularly updated to maintain the good working condition of the metal crusher, and the screen should be regularly checked. The moisture content of the crushed material should be less than 14%, which can not only improve the production efficiency, but also make the crusher not blocked and enhance the reliability of the crusher.

3. Workers should clean the machine before getting on and off the machine, so that the machine can work in the best state every day and prevent blockage