400 ton gantry scissors-Henan Bohan Environmental Protection Technology Co., Ltd.

400 ton gantry scissors Introduction

400T gantry shears are mainly suitable for cutting steel plates, copper plates, nickel plates and other metal plates. Shear force is 100 tons to 250 tons. The size of the material to be cut (12~20mm)*250mm. The cutting frequency is 8-12 times per minute. This series requires simple infrastructure. Gantry shears are hydraulically driven. Compared with mechanical transmission shears, they have the characteristics of small size, light weight, low movement inertia, low noise, smooth movement, flexible operation, and large cutting section. The hydraulic and electric integrated control can implement single and continuous action conversion, simple and convenient to use, can stop and run at any working position, and is easy to realize overload protection. It can be used in a wide range of applications. It can be used as processing equipment for metal recycling processing units, as well as furnace charge processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.

Album

Advantages

1. The width of the knife edge is 1.6 meters, which is convenient for cutting wide materials and more convenient for feeding.

2. The silo automatically presses the material, automatically pushes the material forward, and automatically cuts. The user does not need to do any operation. high productivity.

3. The cutting speed is 3-5 times/min, and the stroke length can be adjusted by the user.

4. The silo is large, the length of the silo is 7 meters before and after, and the width is 1.5 meters. It can load more than 2-4 tons at one time. After the material is loaded, it will automatically press and push the material forward.

5. The material of the cutting blade is H13, and the blades of different materials can also be customized according to user requirements.

6. The slides on both sides of the tool post are lubricated with automatic grease, and the slides are made of high manganese steel wear-resistant materials, which are durable.

7. The length of the cut material is 10 cm, and the length can be adjusted at will.

8. The manufacturer sends someone to install it and train customers to use it.

Working Principle

400T gantry shears, also called gantry shears, the silo automatically pushes the material, fully automatic cutting, the length of the cutting material can be adjusted, and the remote control is controlled. It has convenient operability, labor saving, high cutting efficiency, and can be cut every day. The cutting is about 30-90 tons, and the range of cutting materials is wide. It is one of the necessary equipment for the future development of the scrap steel recycling industry. The manufacturer sends someone to install and train the staff.

Parameter

Specification model	Shear force	System pressure	Material box size	Blade length	Class output	Number of cuts	Motor Power
GKL-400T	400	31.5	50001300500	1400	32-40	4-6	45
GKL-600T	600	31.5	55001500700	1600	64-80	4-7	2*45
GKL-800T	800	31.5	60001700800	1800	120-160	4-8	3*45
GKL-1000T	1000	31.5	600019001000	2000	160-200	4-9	5*45
GKL-1250T	1250	31.5	800020001400	2200	200-240	4-10	6*45